XTM MMT TRUGGY KILLER

This is the MMT I got in trade with Carlos....

Has alot of goodies on it from the factory. Dual steering servos, a sweet Cirrus radio system. I installed a failsafe just in case she loses signal...
this truck comes with twin chassis braces on the rear and a chassis brace up front too. so there is little if any flex in the chassis. also has a 2 speed center with steel spurs. the engine is an XTM 28, basically is an SH full tuned here.

I scored a set of Losi 420 Super Bolt on tires and also scored a set of wheels off e bay for the new tires to go on, they are 3/4" offset so it makes the truck wider and should be alot more stable.... Here is a few of what I have goin on. Look the fuck out Carlos this Big Boy means business

here it is without the body on. as i got it outta the shipping box


Head on shot...


Tail end shot...


Shot of the 2 speed and the


Shot of the out of the chassis


Shot of the New wheels and tires. really makes the truck if ya ask me. I love the way they set the stance of the chassis too


Side view with the new wheels and tires on it


Top view showing the width difference. notice the right side and then the left side , quite a difference there


Looking at it head on with the new wheels and tires. looks mean as hell...


Hope ya all like seeing the way she looks now. sure wish the rain would stop for a week so the puddles go away.....I wanna see how this changes how it handles....

Ya we know the mammoth is a sweet truck also does come with the 290 cc fuel tank wich means way lots of play time . Cant take away nothing fron these sweet xtm monsters XTM

I took the MMT over to mikeys place yesterday, Jason shot some vid of it running, got some good there after shaped the jump a lil more hope ya enjoy the vids

Them are some fine vids mike thanx 4 posting

killer vids pop that thing is a beast would love to see it racing in truggy class

We painted the new F 650 for the MMT yesterday... Came out AWESOME !!!! here is a couple of it on the chassis.....







Notice how the wheel wells line up so nice, and the "INCINERATOR" name just fits too well. Jason did a sweet masking job on this one and I the flame job is too we did 3 bodys yesterday and the other 2 are for Jasons rigs.... one is a FIRST BLOOD 8 going on the USA 1 Electric and the other is SGT SPEED for his hot rod trx stadium truck.... Hope ya like em we sure are happy with them


SGT SPEED


FIRST BLOOD 8

Here is a few of it all detailed up and sitting on its chassis home... Gonna be SWEET out on the track this spring and summer.....











So who is ready for the INCINERATOR ?
caz this is ready for anything .....

Yep! Sweet F650 ING colors and the flames look ss, along with the sticker on the rear window

Rig looks harder than ever.. mike and Jason..

not bad at all man! sweet RC

Well after stripping down that other Mammoth I decided to take some parts for the MMT the center skid i was gonna use but it is different but the steering knuckles fit and so did the rear hubs so on they went next is the shock towers they are goin on also, the shocks on the other mammoth are different too so they stay with that rig too. the aluminum a arms are staying with the Mammoth too, so it will be pretty blinged out when is done , but I got a few of some Losi LST shocks on the MMT and I thats what im gonna do. so will be more modding this winter..... Maybe some custom aluminum arms and some JRP upper links will make the call to this MMT Truck time will tell on to some of what I got so far









with one Losi shock mocked up , i it will work we will soon







I will keep this thread updated as i go along with the MMT hope ya like the

All i got to say is SHOKING !! plan for the mmt u will luv the way shes gonna handle hard landings no problem and so smooth too.. gonna keep my open specially on this thread with hubs .

Well I did clean the truck real good, serviced all 8 shocks and Modded the springs so they fit the perches better by grinding the ends to make a smoother transition and hopefully prevent the springs from cocking on the perch, all the bearings got cleaned and reoiled and is ready for the running gear to be installed so she is ready for battle next time

Nice chiney shox,ur mmt looking N gettn badder and badder mike..

We went to the water park today I took the and did some running. me and put a ramp at the top of the big hill and jumped off a few times.... did manage to break a body post doin that, then afterwards we were runnin out on the flats and I was a loooooooon way away from the MMT and went around a concrete light pole and next thing I do is run smack into the ...... managed to break the front left lower arm and the front shock tower rite the fuck off the truck, hit so hard that the left tire wheel came back and hit the tank breakin off one of the mounts on that too......


the tank mount is broke off and the lower arm and tower too.....







there is a good shot of the tank mount that got ripped off..... Hope ya enjoy the CARNAGE ya can never say I dont run the hard thats for sure

Yes I did get some vids too, will be posting some prolly next week so early

Ya aint havin fun unless your tearin shit up!

Well after my BRAIN FART on saturday I fixed the tank I broke the ear off of, I also put on a new a arm and fixed everything else. now im waiting on the shock towers to arrive from jolly old london england...... I got a pair of em just in case i have another brain fart while driving here is a couple of how I repaired the tank mount, just needs a small spacer on the bottom to compensate for the mount bein a lil higher.....


thats b4 I ground it down and cleaned it up....




this is after I fixed it, I ground the tab off and used a lil piece of 1/8x1/2x1/2 aluminum angle and shaped it with my dremel and a small file. then used some plumbers goop to stick it in place and ziptied it down till it was dry, notice I drilled it to let the goop get a good bond with the tank and bracket... I am hopin it will stay fixed thanks for

repair mike looks like will mount good.

Well I fixed the          and it is now ready to run again. new parts included a lower arm and the front shock tower and repairing the fuel tank mount. I         it came out pretty good....


 


 Thats the tower i had to get from London England of all places  



Thats the lower arm I had in my parts bin  


 thats how I fixed the mount on the tank, just used a small spacer underneath and it all fits perfectly..... The tank worked out          I was even able to use a piece of fuel tube inside the mount hole to provide isolation from vibration....
 Hope ya like the      zzzzzzz

 deal u found parts.xtm stuff a Lil hard to git good job