Search
Latest topics
Our Rc Trusted sites
pro line
Yessir! Right heeah!
3 posters
Page 1 of 1
Yessir! Right heeah!
Wassup fellas!
Sorry for the extended leave, really just lost interest in the whole r/c thing.
Was always around my computer, real coward for not logging in and checking up on all you farts.
Picked up a Savage off of ebay tonight!
Savage X with a Axial .32. Doesnt look like the chassis has seen 5 tanks of fuel.
The skid plates are near mint.
Entire truck looks brand new. So i am stoked!
Gonna buy some tools, a battery charger and a few other odds and ends and i will be ready.
Sorry for the extended leave, really just lost interest in the whole r/c thing.
Was always around my computer, real coward for not logging in and checking up on all you farts.
Picked up a Savage off of ebay tonight!
Savage X with a Axial .32. Doesnt look like the chassis has seen 5 tanks of fuel.
The skid plates are near mint.
Entire truck looks brand new. So i am stoked!
Gonna buy some tools, a battery charger and a few other odds and ends and i will be ready.
Z400- Moderator
- Posts : 144
Join date : 2010-08-08
Age : 34
Location : Central Illinois
Re: Yessir! Right heeah!
back to the hobby Sean.... I look forward to sum and vids
Jam Racing_1- Administrator
- Posts : 502
Join date : 2010-06-12
Age : 69
Location : Clearlake, California
Re: Yessir! Right heeah!
Hell yeah!
Here are the pictures from the Ebay listing.
You guys remember my old heep?
Cant even remember who i sold it to..
Here are the pictures from the Ebay listing.
You guys remember my old heep?
Cant even remember who i sold it to..
Z400- Moderator
- Posts : 144
Join date : 2010-08-08
Age : 34
Location : Central Illinois
Re: Yessir! Right heeah!
Still waiting on my shit to arrive. Coming from Puerto Rico
Z400- Moderator
- Posts : 144
Join date : 2010-08-08
Age : 34
Location : Central Illinois
Re: Yessir! Right heeah!
som' bitch may be here tomorrow!
Z400- Moderator
- Posts : 144
Join date : 2010-08-08
Age : 34
Location : Central Illinois
Re: Yessir! Right heeah!
Ive had the tool box for 9 years, the desk was free from work.
Here she be
Desk is too fucking small.
Last work area i had was also my computer desk, ive still got it but i cut down the table top.
Definitely going to copy my last setup.
Dont have enough room to work on that little ask desk.
Here she be
Desk is too fucking small.
Last work area i had was also my computer desk, ive still got it but i cut down the table top.
Definitely going to copy my last setup.
Dont have enough room to work on that little ask desk.
Z400- Moderator
- Posts : 144
Join date : 2010-08-08
Age : 34
Location : Central Illinois
Re: Yessir! Right heeah!
, I also have that same pit box. but mine has the front on it..... it holds alot of stuff I have mine LOADED
Jam Racing_1- Administrator
- Posts : 502
Join date : 2010-06-12
Age : 69
Location : Clearlake, California
Re: Yessir! Right heeah!
Still have the front of mine, i remove it when i've got my box sitting on my work top like that. Makes it a whole lot easier for using the drawers.
Z400- Moderator
- Posts : 144
Join date : 2010-08-08
Age : 34
Location : Central Illinois
Re: Yessir! Right heeah!
I just noticed this, but you can see the front of the tool box laying on the floor under my desk.
Anyways, bought a pullstart the other day, it arrived today.
Went up to the LHS and bought a quart of fuel.
Swapped out the roto start for the pull start, added some fuel, richened
up the needles, primed the engine and pulled on the pullstart. fired up on the 3rd or 4th pull.
Runs alright i guess, first Axial .32 mill ive owned. I had a .28RR in a Revo quite a few years back, i remember it being a complete animal. Seems like it would blow this .32 out of the water.
Only ran a tank through it, dont have a temp gun yet.
All the annoying neighborhood kids came running, about shut it down and
went back inside. I hate little kids when it comes to these toys.
They will come from 3 blocks away with 2 million questions.
I know they mean no harm, but go home. LOL
Anyways, bought a pullstart the other day, it arrived today.
Went up to the LHS and bought a quart of fuel.
Swapped out the roto start for the pull start, added some fuel, richened
up the needles, primed the engine and pulled on the pullstart. fired up on the 3rd or 4th pull.
Runs alright i guess, first Axial .32 mill ive owned. I had a .28RR in a Revo quite a few years back, i remember it being a complete animal. Seems like it would blow this .32 out of the water.
Only ran a tank through it, dont have a temp gun yet.
All the annoying neighborhood kids came running, about shut it down and
went back inside. I hate little kids when it comes to these toys.
They will come from 3 blocks away with 2 million questions.
I know they mean no harm, but go home. LOL
Z400- Moderator
- Posts : 144
Join date : 2010-08-08
Age : 34
Location : Central Illinois
Re: Yessir! Right heeah!
Well, went out for a 2nd tank...
Them damnHardened spur gears have a love hate relationship with those standard clutchbells.....
Them damnHardened spur gears have a love hate relationship with those standard clutchbells.....
Z400- Moderator
- Posts : 144
Join date : 2010-08-08
Age : 34
Location : Central Illinois
Re: Yessir! Right heeah!
I knew there was something funky going on.
Every time i would mesh the spur/clutchbell i noticed my engine mount seemed to be tweaked.
Finally took the engine back out to remove the damaged clutch bell.
Unbolted the engine mount and placed it on a flat surface, sure enough, its bent.
Every time i would mesh the spur/clutchbell i noticed my engine mount seemed to be tweaked.
Finally took the engine back out to remove the damaged clutch bell.
Unbolted the engine mount and placed it on a flat surface, sure enough, its bent.
Z400- Moderator
- Posts : 144
Join date : 2010-08-08
Age : 34
Location : Central Illinois
Re: Yessir! Right heeah!
Dont im going to run it again until it is built up to my specs... LOL
Replaced the clutchbell and the clutchbell bearings.
Went out and before i was even down to half a tank of fuel left my left front
wheel nut falls off. Lost the nut, hex and pin for a moment. Found the nut and the hex, chopped up an allen wrench for a pin.
Take it out the next day to show my Dad, clutch related problem i believe now.
Clutch seems to be engaged non stop now.
Going to take it apart here shortly
Replaced the clutchbell and the clutchbell bearings.
Went out and before i was even down to half a tank of fuel left my left front
wheel nut falls off. Lost the nut, hex and pin for a moment. Found the nut and the hex, chopped up an allen wrench for a pin.
Take it out the next day to show my Dad, clutch related problem i believe now.
Clutch seems to be engaged non stop now.
Going to take it apart here shortly
Z400- Moderator
- Posts : 144
Join date : 2010-08-08
Age : 34
Location : Central Illinois
Re: Yessir! Right heeah!
Well...
Clutch is good. Shit ass brass bushing has worn down somehow and was applying pressure onto my clutchbell. I hate this brass shit. All of my last setups used an aluminum spacer at the end of the crank which was perfect.
Man i cant wait to get back into the swing of things and have all my shit setup
the way i want it.
Lost all 4 screws for the pullstart, so it came off, and came apart.
Thing had like 5 or 6 tanks of fuel of run time. Its all torn apart and fucked.
Going to order a 2nd and use this one as a spare after i get the spring put back in it.
Clutch is good. Shit ass brass bushing has worn down somehow and was applying pressure onto my clutchbell. I hate this brass shit. All of my last setups used an aluminum spacer at the end of the crank which was perfect.
Man i cant wait to get back into the swing of things and have all my shit setup
the way i want it.
Lost all 4 screws for the pullstart, so it came off, and came apart.
Thing had like 5 or 6 tanks of fuel of run time. Its all torn apart and fucked.
Going to order a 2nd and use this one as a spare after i get the spring put back in it.
Z400- Moderator
- Posts : 144
Join date : 2010-08-08
Age : 34
Location : Central Illinois
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
Thu 19 Nov 2020 - 4:45 by Z400
» More Water Park Bashin
Tue 23 Jan 2018 - 23:33 by admin
» RC4WD TrailFinder 2
Tue 23 Jan 2018 - 23:07 by admin
» SAVAGE for Jam Racing 1
Fri 10 Jul 2015 - 1:55 by true2dz
» New addition to the fleet
Wed 17 Sep 2014 - 19:40 by true2dz
» ANDROID WALKY TALKY
Sun 29 Jun 2014 - 16:33 by true2dz
» Fishing North Dakota Lake Sakakawea
Mon 28 Oct 2013 - 17:23 by Jam Racing_1
» Z400 A pleasure to deal with
Wed 16 Oct 2013 - 16:43 by Jam Racing_1
» Yessir! Right heeah!
Wed 2 Oct 2013 - 13:47 by true2dz