KING FUBAR

3-spd trans w/Rev & GHH alloy trans-case


Wasp 26 (ported/polished, MSD cyl.head, S25 closed exhaust header, S25 carburetor


All alloy uprights and knuckles


HPI alloy adj shocks & GHH bulkheads


Titanium brake rotor, HPI calipers


Tipping the scale in at.....(with race cage) LOL

[img]

: didn't know you had such a sweet basher ,Nice mods now wer is the vid ?

, I agree with Carlos, Sweet fuckin rig!!! , wheres the vid ? or is it just a shelf queen for purty ? I mean if it is just say it
If ya aint got it dirty I suggest ya do as soon as possible

only reason its clean cuz i aint been driving it lately (last year or so)
but ive had this since its release known as a S-25, ive spent so much fuckin cash on this i dont wanna even add the figures LOL

its takin a beating and ill still go head on with any of your traxxas, tamiya or even that mgt bro ahah

No video means it never happened

well then.... LOL
the pics seen above were taken with my Samsung Omnia cellphone and i dont have a camera so i guess it never happened but....ill still smash my fucking way though your RCs with KING FUBAR any time.

i built this bitch to withstand the abuse i put on it and when it started out as the S-25 id drive it until something broke then at that time upgrade to something that could take the beating.

forgot too mention that both diffs are using alloy casings with ofna crosspins and hardened bevel gears (shimmed) with HypoyC 80w-90 gear oil

well sittin on a shelf lookin pretty is and all, but a video speaks more than 10.000 words about how tuff it is... I can all that sweet aluminum, I got one too is a sweet truck just as much done up so i will be waiting on a vid till then it never happened

you wanna a fuckin Vid?
heres a Vid for ya Biiiiiiiiiitch! ahahaha
http://www.youtube.com/watch?v=Muj26g3eugU

Yup, I knew was a shelf queen and i like the vid ur starring in there too swampy.

ill try to get a vid of King Fubar eventually but it wont be sometime til spring/summer due to weather being too cold yet. And i also need to purchase a new piston/sleeve set for this Wasp26.

then ill show you dumb bastards what this fucker can do!
even weighing in at 17lbs takes off on 1 wheel and it prob
having something to do with that 3spd trans (1st gear being geared
differently). I can promise you that this is NO shelf queen as i
wouldnt spend this amount of cash for something to stare at LOL

i built it for destruction!

decided to start back on my beloved bitch!

seeing as my Custom roll cage interferes with just about everything
from the fuel tank, to the electronics.....

i started my custom Rx box for Fubar!
Keep in mind i "JUST" started this project so it is in
relatively rough shape at this time, as i piece this together.
Using the old school S25 radio box hacked up to fit the rear
end of the chassis. also using the metal supports to keep it in place.

Still need to make the bottom section to further seal this thing
off. Ill clean it up of course...LOL







On/Off switch installed


ill have to buy a new fuel tank for up front as the stock HPI
Savage tank is far to tall to stand up front. Im thinking using
a MGT tank.

more to come!!!! :D

JUST PAINTED ALL MY WHEELS BLACK THIS MORNING....
ALSO THINKIN ON DOIN THE RACE CAGE BLACK.

installed a working winch today (once i find the module for it ) which will be controlled
via 4th CH.



Got the electronics all figured out now and tucked away (temporarily) as i need to
make one last custom extension from the 6v hump-pack which is located up front
in its original location in the Fr/Rx box, and lead it to the Rx located in the rear radio tray.



Im even considering on using up my NVS from Axial, which would give me the headlights, tail lights,
turn signals and i i have a set for fog lights....we will see?? hehe

Race cage painted a few nights ago.


Needed:

custom servo plate - Fabricated
6v battery to Rx wire extension - Approx 8" length
Midtank mount - Fabricated

Looks man!! the winch does look badass.When u get the video get the winch in action dragging ur truck around the yard watching it break into crumbs ..

Sweet man!! Cant wait to see the video..